What is this test about and what does it have to do with mold growth? This test measures
the amount of water vapor that comes out of a concrete slab so that when flooring is
installed it does not condense under that flooring and grow mold or damage the flooring
that is installed on it such as wood flooring. Though moisture meters can give a quick read
as far as how much moisture content may be in the concrete slab this is more specific and
accurate as it will actually give a pounds per square inch determination based on this test.
It's used for verification/documentation purposes when companies are installing products
such as new wood flooring or even other flooring to verify that the amount of water vapor
coming out of the concrete is not too high and typically not above 3 lbs per square inch. If
the amount of water vapor is above 3 lbs per square inch, that needs to be addressed
typically by the applying the right type of sealer or sometimes other procedures so that this
moisture does not become an issue in the future. When the test is completed and added to
the building or contractor warranty file.
Steve Mullins (i.e. Mold Detector)
Certified Microbial Consultant (CMC)
Moisture and Mold Detection, Inc.
Calcium Chloride Test?
About Us
Services
Contact Us
